It's to the right of the "IPv4" or "IPv6" value; the number here corresponds to your specific device on a local network. Type in ipconfig /release and press ↵ Enter. Doing so releases your IP address. Type in ipconfig /renew and press ↵ Enter. This command assigns a new IP address to your device.

No, a VPN disguises your public IP behind another public IP. If you use a VPN and it still blocks you, then it's blocking you using another marker. The article is talking about changing the public IP of the equipment you use to connect to your ISP. That can be difficult or impossible to change. Just get a VPN like PIA and it should work.

To find your local or private IP address from the Command Prompt in any version of Windows, simply open up the Start Menu, search for the Command Prompt, open it up, and type the following command: Windows will output a lot of details, but the line you're looking for is the one that says "IPv4 Address" which will display your local / private IP
On Windows 10, click Settings > Network & Internet > Proxy. On Windows 8 systems, click Settings > Network Proxy. Scroll down to “Manual proxy setup” and set the “Use a Proxy Server” switch to On. In the address field, type the proxy server name or IP address. In the Port field, enter the proxy port number. DHCP (dynamic host configuration protocol) assigns IP addresses to devices on your network. Each IP address identifies a device on the network and enables it to communicate with other devices on the network and internet. A network device needs an IP address much like a phone needs a phone number. Your network should have only one DHCP server. . 454 232 326 317 466 442 83 408

can i change my ip address on my phone